Tami Rosa. Home Lighting. December 01st , 2017.
Up above your head, in your ceiling you should have three wires ready to be reconnected. Also you should have a new fixture hanger device in with your new package. If your old light already had one, great, it is already installed. If not you will have to put the new one in. It looks like a pivot with screws on both ends. These allow for adjustment of your new fixture. Install this hanger using two screws provided or use your old ones. Once you have the pivot installed it should have two screws dropping down for you to connect your new base. Next it’s time to connect the green wire. Your fixture probably has a bare copper wire available for the grounding. Then connect the white to the white. You can use the old nuts, or the new wire nuts if you prefer. Then connect the black or red wire. Now make sure your connections are tight. Tug on the wires, trying to pull them out of the wirenut. This will assure a solid connection. If it pulls out, reconnect it and pull again. Strike three is better than a house fire, so reconnect it again and try to make it very tight. Once its wired, you can mount the base to the ceiling now. This can be very tricky and even frustrating. Be patient and get the screws through the insulation and twist the base to lock the screws in place, then gently tighten them just enough to hold the fixture snug to your ceiling.
Pendant lighting serves as a multifunctional type of lighting for a various rooms; whether they are over desks, night stands, or a traditional table, these lights are a luxurious home accessory. Yet another aspect of the lights to be admired, the length of the lighting is easily adjusted which can instantly alter the ambiance of the entire room. Placing one or more pendant lights over a kitchen table or throughout an entire dining room will no doubt create a more sleek, elegant look for the room overall. There are also ways to mix and match various luxury sconces with pendant lighting in a retro or shabby chic manner of décor.
If there is a general rule of thumb about what constitutes mini pendant lights, it’s that they are usually less than 12\" in size. Three to four mini pendant lights cast about as much light as two regular pendants that have two bulbs each. The beauty of minis, however, is that you can use more of them over a greater area, creating innovative lighting solutions for a room that really make it stand out. If you want to conserve energy, there is a wide selection of low voltage mini pendant lights to choose from.
When choosing your handing pendant lights, you will have to take care of a number of factors. The amount of light you want in your rooms is one of them. Plus, you should be aware of the art decor that your house has, for whatever style you choose must blend in with the surroundings. If this work seems to be beyond you, do not worry. Hire some interior designers and lighting experts who will give the best advice possible.
Remember, a well lit room will be used a lot whereas a poorly light room will often not be used as much or at all. Good lighting effects do not have to be complicated and the best lighting schemes usually use lesser light than more light and are just positioned and layered correctly for that simple, yet dramatic effect.
Any content, trademark’s, or other material that might be found on the Klframeshop website that is not Klframeshop’s property remains the copyright of its respective owner/s. In no way does Klframeshop claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.