Magdalena Roberts. Home Lighting. December 19th , 2017.
Also known as railing lighting systems, this type of kitchen lighting fixture has a wide range of design flexibility. The track can be long or short, curved or straight. Spotlights, pendants, or other kitchen lighting fixtures can be hung from the track at different points, directions and heights to provide accent, task or general lighting.
Installation - LED canopy light fixtures can be designed for interior or exterior uses. This means that the LED canopy light fixture that is best for the garage might not be the best for an interior space in your retail shop. Exterior fixtures come tougher so they are more resistant to environmental elements. Think about where you want to install the fixtures so you are able to make the best choice for the space needs.
One of the appealing factors of the pendant is its versatility. Pendants can often be found in hallways, small foyers, kitchens, bathrooms and hallways. Narrow areas that need lighting are ideal candidates for a pendant light. The pendant itself is generally completely enclosed, hiding the light fixture itself to avoid glare. Because of its simplicity, the pendant is usually made of a neutral substance employing white or opaque glass.
Safety first, the power to the light needs to be locked out, or locked in the off position so that no one can turn it on while you are working on it. NOW, I had one fella who thought just turning off the switch was good enough, however, he forgot to tell his pet dog. Yes, his dog, who apparently thought it was too dark in the room and turned on the switch while he was holding the black wire. OUCH! So preferably you shut off the breaker that feeds the bedroom lights. Ok, once you have assured that the power is off and the light in room is off you can start. With a screw driver in hand and a safe ladder to get you up there, lets remove the old fixture.
Remove the plastic wire nuts from the wires, disconnect the wires, then remove the mounting bracket. Replace the bracket with the new bracket that came with the light. Once the bracket is installed, it’s time to connect the wires. Follow the diagram that came with the light. In most cases, white goes to white, black to black and ground to ground, but every house, especially older ones, can be a bit different. The ground wire connects to the ground screw on the bracket. Before you slide the new mini pendant lights onto the mounting bracket, add new wire caps to the connections.
Any content, trademark’s, or other material that might be found on the Klframeshop website that is not Klframeshop’s property remains the copyright of its respective owner/s. In no way does Klframeshop claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.